Bosch Appliances VMD01 M60 NTSC manual Copy parameter sets, Example of perspective positioning

Programming, continuedEnglish

Example of perspective positioning

Horizontal

Vertical

Longer side

(horizontal perspective)

Longer side

(vertical perspective)

Direction of movement set 1 or 2

The live image is shown with a small rectangle in the middle of the image and all movements lead to an alarm being triggered. No permitted direction of movement is plotted.

Plotting the permitted direction of movement:

The permitted direction of movement is plotted by pressing the left mouse button in the live image. This is marked by an arrow with two tolerance lines. These two lines represent the tolerance in the permitted direction of movement. If the cursor is moved to the arrow tips or the tolerance lines, the cursor symbol changes. The arrow and tolerance lines can be rotated and the tolerance lines opened up or made narrower with the left mouse button.

Pressing the mouse button in the opposite arrow direction results in the appearance of a second arrow with tolerance lines being plotted on the image. The arrows and tolerance lines can be deleted by dragging a frame over them with the right mouse button.

5.2.3Copy parameter sets

Parameter set 2 becomes a copy of set 1, or 1 of set 2.

– 14 – A1 February 03/Trb