Bosch Appliances VMD01 M50 PAL, VMD01 M60 NTSC manual Saving parameter sets

Programming, continuedEnglish

5.2.4Saving parameter sets

For this, use the service program VMD01Service.exe on a PC. Connect the PC’s serial interface to the unit’s RS232 interface via a null-modem cable. To save, call the program with the parameter ‘–pd’. The parameter data is saved in a file in the same directory as the software. The file name may look as follows “VMD01ParaXXXXX”. XXXXX here represents the unit ID. The parameter data can be played back in with the tool. The parameter ‘–pu’ and the parameter file are entered for this purpose. This allows copying of parameter sets from one unit to another.

– 15 – A1 February 03/Trb