3. If you select [Single] in the previous step, the |
|
|
figure shown on the right hand side will appear. |
|
|
Select the image that you want to print with |
|
|
the e / f buttons. |
|
|
Select the print number (up to 99) with the c |
|
|
/ d buttons. |
|
|
After selecting the desired image and |
|
|
printing number, press the SET button to | ; | ; |
confirm. |
|
|
4. Select [Exit] with the c / d buttons, and press |
|
|
the SET button. |
|
|
|
|
|
|
|
|
; 
5. Select [Print] with the c / d buttons, and press the SET button to start printing.
; 
6. The printing starts and the figure shown on the right hand side appears.
[COMPLETE] will be displayed temporarily, reminding you that the printing procedure is
finished. If an error is detected during the connection
(i.e. a printer hardware problem) between camera and printer, [PRINT ERROR] will be displayed.
If an error is detected during the communication (i.e. wrong setting on the camera) between camera and printer, [ERROR] will be displayed.
The image printing may fail if the power to the camera is cut off.
