Sanyo VPC X 360 E, VPC-X360, VPC-X360EX 2. Internal Communication Bus, 3. Key Operaiton, Table 4-2.Key Operation, Fig. 4-1Internal Bus Communication System

2. Internal Communication Bus

The SY1 circuit board carries out overall control of camera operation by detecting the input from the keyboard and the condition of the camera circuits. The 8-bit microprocessor reads the signals from each sensor element as input data and outputs this data to the camera circuits (ASIC) or to the LCD display device as operation mode setting data. Fig. 4-1 shows the internal communication between the 8-bit microprocessor and ASIC.

				S. REQ	ASIC
8-bit		ASIC SO
					32 bit
microprocessor
			ASIC SI		CPU
	ASIC SCK
				RESET

Fig. 4-1 Internal Bus Communication System

3. Key Operaiton

For details of the key operation, refer to the instruction manual.

SCAN
SCAN IN	0	1	2	3	4
OUT
0					MACRO
1	SHUTTER 1st	SHUTTER 2nd	CAMERA	PLAY	-
2	BARRIER	CARD LID	MODE	SET	TEST

Table 4-2. Key Operation

－ 10 －