13
Tabl e
4. Printed Overstrike Err or Messa
g
es
Error Messa
g
e
Ex
p
lanation
T
ag R/W Err
x
Check media
Tag Co mm
Err
x
Check cable
The printer software attempted to write to or read from the
RFID tag, but the RFID encoder indicated that the tag could
not be written to, or re ad from.
The printer software temporarily lost communication with the
RFID encoder, or commun ication between the prin ter
software and the RFID encoder was not synchronized and
had
t
o be fo
r
ced.
NOTE: The x in the error messages represen ts a number code that identifies the area
in the printer software or RFID encoder wh ere the failure occurred.

Custom Setting

This menu item contains submenus that allow th e RFID encoder to work with tag types that are not
listed in the Tag Type menu it em.
NOTE: SATO cannot guarantee the performan ce of tag types not certified by SATO.
Custom Setting Submenus
Custom Tag
This menu item enables or disables the Cust om Setting submenus. The default is Disable.
When Custom Tag is set to Disable, the settings in the Custom Setting submenus are ignored by
the RFID encoder.
When it is set to Enable, the RFID encoder uses the settings in the Custom Setting submenus,
which must be set to match the characteristics of the custom tag.
When it is set to Duplicate, the settings of the selected Tag Type menu item are copied into the
Custom Setting submenus, but are ignored by the RFID encoder.
I
n
t
ro
d
uc
ti
on
t
o
th
e
RFID
con
fi
gura
ti
on op
ti
ons