12
Read Tag
Reads the tag in range of the internal RFID cou pler and reports the tag data to the debug port and
momentarily displays it on the control panel’s LCD. It is mainly intended for data verification purposes.
IMPORTANT
This menu item does not position the RFID tag over the coupler. Make sure to position the tag
over the coupler to receive an accurate reading.
Read Tag & Eject
IMPORTANT
This menu item does not position the RFID tag over the coupler. Make sure to position the tag
over the coupler to receive an accurate reading.
The menu item works exactly the same as Rea d Tag (above), except that after the printer reads the tag ,
it feeds the label to the next top-of-form .
Comm Retry
Selects the number of automat ic (internal) retries that the printer wil l attempt on the same tag before
declaring a tag error and performing the Err or Handling mode selected (Overstrike, Stop, or None).
The default value is 2.
Display F/W-
V
er
Displays the reader firmware version on the co ntrol panel’s LCD.
Overstrike Style
Selects the style of the overstrike pattern. T he default is Grid.
For the Grid option, a grid pattern is printe d during overstrikes. For the Error Type Msg option, an error
message is printed to indicate which error oc curred.
I
n
t
ro
d
uc
ti
on
t
o
th
e
RFID
con
fi
gura
ti
on op
ti
ons