15
2. Copying

Basic Procedure

AIf the machine has user codes set,
enter a user code (up to eight dig-
its) using the number keys, and
then press the {#} key.
The machine is ready to copy.
Reference
For users codes, see “Key Oper-
ator Tools”, General Settings
Guide.
BMake sure "d Ready" appears on
the display.
If any other function is displayed,
press the {Copy} key.
vInitial copy display
CMake sure no previous settings
remain.
Note
rWhen there are previous set-
tings remaining, press the {Re-
set} key and enter again.
DPlace your originals.
Reference
p.10 “Placing Originals”
ESet your desired settings.
Reference
Please refer to each function.
FEnter the required number of cop-
ies using the number keys.
Note
rThe maximum copy quantity
that can be set is 999.
GPress the {Start} key.
Copying begins.
Note
rWhen placing originals on the
exposure glass, press the {#}
key after all originals are
scanned.
rCopies are delivered face down.
-How to operate
vTo stop the machine during a multi-
copy run.
Press the {Clear/Stop} key.
vTo return the machine to the initial
condition after copying.
Press the {Clear Modes} key.
vWhen clearing entered values.
Press the {Clear/Stop} key or [Clear]
on the display.
vTo check the settings.
Press the {Check Modes} key.