Copying
74
2
FPress [OK].
When the settings are successfully
stored, m appears on the left side
and the program name appears on
the right side of the registered pro-
gram number. The display returns
to the initial copy display for a
while.
Changing a Stored Program
ACheck the program settings.
Note
rWhen you want to check the
contents of a program, recall the
program. See p.74 “Recalling a
Program”.
BRepeat steps A to D of “Storing a
Program”.
CPress [Register].
Repeat steps E, F of “Storing a Pro-
gram”.
Note
rWhen it is overwritten, the pre-
vious program is deleted.
Deleting a Program
APress the {Program} key.
BPress [Delete].
CPress the program number you
want to delete.
DPress [Yes].
The program is deleted, and the
display returns to the initial copy
display.
Recalling a Program
APress the {Program} key.
BPress [Recall].
CPress the program number you
want to recall.
The stored settings are displayed.
Note
rProgram numbers with m
against them already have set-
tings in them.
DPlace the originals, and then press
the {Start} key.