User Tools (System Settings)
104
4
To enter a port number
APress [Change] under Port No..
BEnter the port number using
the number keys, and then
press [#].
To set authentication
APress [Next].
BPress [ON] or [High Security] un-
der Authentication.
Note
❒[High Security] is not available
with LDAP Version 2.
❒When [ON] or [High Security]
is selected, the administrator
account name and password
is required to access the
LDAP server.
❒When [High Security] is select-
ed, you can use a generic
password unique to the net-
work. If you do this, the serv-
er also requires the same
setting. For details, ask your
network administrator.
To enter the user name and password
Note
❒To use the administrator ac-
count for authentication, enter
the account name and password
here.
❒If you leave the user name and
password blank, users will be
prompted for the password ev-
ery time they attempt to connect
to the LDAP server.
APress [Next].
BPress [Change] under Us er
Name.
CEnter the user name, and then
press [OK].
DPress [Change] under Password.
EEnter the password, and then
press [OK].
To test the connection
APress [Connection Test].
A connection test is carried
out.
BPress [Exit].
Note
❒If the connection test fails,
check your settings, and
then try again.
RussianC3_ENgsg-F_FM.book Page 104 Monday, June 16, 2003 6:48 PM