Getting Started
Flash
While on a call, you may want to transfer the call to someone else connected to the same PABX. This can be done by using the flash function.
•Press the Flash key (Soft Key 2 
) or press and hold the # key for 2 seconds during an external call.
The base station will then transmit a FLASH signal to the line.
Inter-digit pause
Some phone numbers require you to dial additional digits a few seconds after entering the phone number. You can insert a
1.Enter the first set of numbers.
2.Press the 
key and a 
) and choose the item “Insert Pause”.
3.Enter the number you want to dial, and press the 
key to start a call.
16
