Getting Started
use the instructions of this base to place it in registration mode.
When you need to register a different handset on the base of your telephone, you can place it in registration mode by pressing and holding the key on the base for 5 seconds or until it gives out a confirmation tone. Then, follow the specified registration procedure for the other handset.
Manual selection of a base
This function is used to select one specific base among the ones to which the handset is already assigned. This selection will not change automatically when the handset loses synchronization with the base.
1.Go to the “HS Settings” Menu and choose “Switch Base”. The display now shows the currently selected base’s number.
2.Use the 
or 
keys to select the base. Press the OK key (Soft Key 1). The handset tries to search for the selected base.
3.Press the OK key (Soft Key 1 
) to confirm once the base is located.
Automatic base search
This function is used to enable the automatic base selection mode. Automatic selection means that every time the handset loses synchronization with the current base, it will look for another one automatically from its list of bases.
18
