Scag Power Equipment SFZ manual Maintenance Considerations & Storage

Section 2

2.6MAINTENANCE CONSIDERATIONS & STORAGE

1.Never make adjustments to the machine with the engine running unless specifically instructed to do so. If the engine is running, keep hands, feet, and clothing away from moving parts.

2.Disengage drives, lower implement, set parking brake, stop engine and remove key or disconnect spark plug wire to prevent accidental starting of the engine when servicing or adjusting the machine. Wait for all movement to stop before adjusting, cleaning or repairing.

3.Disconnect battery or remove spark plug wire before making any repairs. Disconnect the negative terminal first and the positive last. Reconnect the positive first and the negative last.

4.Keep all nuts, bolts and screws tight, to ensure the machine is in safe working condition. Check blade mounting bolts frequently to be sure they are tight.

5.Do not change the engine governor settings or overspeed the engine. See the engine operator's manual for information on engine settings.

6.To reduce fire hazard, keep the cutting units, drives muffler and engine free of grass, leaves, excessive grease, oil and dirt.

7.Park the machine on level ground and engage the parking brake.

8.NEVER allow untrained personnel to service the machine.

9.Use care when checking blades. Wrap the blade(s) or wear gloves and use caution when servicing blades. Only replace or sharpen blades. NEVER straighten or weld blades.

10.Keep all parts in good working condition. Replace all worn or damaged decals.

11.Use jack stands to support components when required.

12.Carefully release pressure from components with stored energy.

WARNING:

Hydraulic fluid is under high pressure. Keep body and hands away from pinholes or nozzles that eject hydraulic fluid under high pressure. If you need service on your hydraulic system, please see your authorized Scag dealer. If hydraulic fluid is injected into the skin, it must be surgically removed within a few hours by a doctor or gangrene may result.

13.Let the engine cool before storing.

14.DO NOT store the machine near an open flame.

15.Shut off fuel while storing or transporting.

16.DO NOT store fuel near flames or drain indoors.

17.Charge batteries in an open well ventilated area, away from spark and flames. Unplug charger before connecting or disconnecting from battery. Wear protective clothing and use insulated tools.

8