Scag Power Equipment SFZ Maintenance Chart - Recommended Service Intervals, Hours, Break-In

Section 7

MAINTENANCE

7.1 MAINTENANCE CHART - RECOMMENDED SERVICE INTERVALS

		HOURS
Break-In 8		20	40	100	200	400	Procedure	Comments
(First 10)
X							Check all hardware for tightness
X							Check hydraulic oil level	See paragraph 7.2
X							Check all belts for proper alignment	See paragraph 7.7
X							Check hydraulic hoses for leaks	Use extreme caution when
								checking the hydraulic hoses
								See paragraph 2.6
	X						Check seat belts for damage	See paragraph 2.5
	X						Check engine oil level	See paragraph 7.3
	X						*Clean mower	See paragraph 7.10
	X						Check condition of blades	See paragraph 7.8
	X						Check tire pressure	See paragraph 7.9
		X					Change engine oil and filter	See paragraph 7.3
			X				Check battery,	See paragraph 7.6
							clean battery posts and cables
			X				Check belts for proper alignment	See paragraph 7.7
				X			Check Operator Pressence System	See paragraph 2.3
				X			Change engine oil	See paragraph 7.3
				X			Drain hydraulic system, replace	See paragraph 7.2
							hydraulic oil and filters	Use SAE 20W50 Motor Oil
				X			*Clean air cleaner element	See paragraph 7.5
					X		Check hardware for tightness
					X		Change engine oil and filter	See paragraph 7.3
					X		Check hydraulic oil level	See paragraph 7.2
						X	Replace engine fuel filter	See paragraph 7.4
						X	Drain hydraulic system, replace	See paragraph 7.2
							hydraulic oil and filters	Use SAE 20W50 Motor Oil
						X	Adjust electric PTO clutch	See Scag Dealer

* Perform these maintenance procedures more frequently under extreme dusty or dirty conditions.

27