SWR Sound manual SM-900 Bi-AmpOperation Diagram, Guide

SM-900 Bi-Amp Operation Diagram

For Bi-Amp operation, the power amp assign switch must be set to the “Stereo” position, only the right and left Speakon output jacks or left and right 1/4” output jacks may be used.

Power Amp Assign Switch set to “Stereo” position.

Shielded Patch Cable from High X-Over Output to Left Stereo Effects Return

						1		2
OFF
				ON
	A/C LINE FUSE
						LEFT SPEAKER
					L SPKR
SLO BLO		FUSE	8 AMP		FUSE		FUSE
					10 AMP

120VOLTS 50/60 HZ

960 WATTS

SPEAKER OUTPUTS

350W X2 STEREO

BRIDGE MONO

800W

12

RIGHT SPEAKER

R SPKR

FUSE FUSE 10 AMP

EFFECTS	X OVER	XLR PAD
LEFT	OUT
	SEND
		PULL GND LIFT
		MIN	MAX
		BALANCED
	HI	OUT
STEREO
RIGHT	MONO
RETURNS	LOW	TO
		TUNER
		INPUT
		DIRECT	LINE

Shielded Patch Cable from Low X-Over Output to Right Stereo Effects Return

SM-900
USER	Speaker 1	Speaker 2
	Midrange/Tweeters	Woofers
GUIDE • 19	(High Frequencies)	(Low Frequencies)

Note: An effects unit may be inserted between the X-Over Outputs and the Effects Return Jacks. For instance, it is a popular practice to insert a Chorus unit between the Hi X-Over Output and the Left Stereo Effects Return, so that only the high frequencies are chorused while the low frequencies remain tight and dry. In this manner, the player can get the desired special effect without “muddying up” his/her tone.