Scag Power Equipment SFZ Tractor Contd, Cutter Deck, Hydraulic System, Productivity, Travel Speed

Section 3

3.3 TRACTOR (CONT'D)

Travel Speed:
Forward	0-8 MPH
Reverse	0-5 MPH
3.4 CUTTER DECK

-NOTE-

The machine will travel at 8 mph for transport purposes. For best cutting performance the forward travel speed should be adjusted depending upon the cutting conditions.

Type:	Floating, Adjustable, Anti-scalping, Hybrid Design Combines
	Out-front and Belly-mount Designs
Construction:	10-Gauge top with 11-Gauge reinforcement throughout the
...................................................................................................	spindle area, 7-Gauge skirt for strength and longevity.
True Cutting Width:	48" (122.0 cm), 52" (132.0 cm)
Cutting Height Adjustment:	Foot Operated Lever Adjustment from Operator's Seat, 1.00" to
	4.5" in 1/4"increments
Cutter Blades:	.197 Thick, Milled Edge, Wear Resistant Marbain™
Blade Engagement:	Electric Blade Engagement Clutch with Control Panel Switch
	Connected to the Cutter Deck via Belt.
Discharge Opening:	Extra Wide Discharge Opening with Spring Loaded Discharge Chute
Spindles:	Heavy-duty Spindle Shaft, Cast Housing, Sealed Ball Bearing,
	Maintenance-Free
Spindle Pulleys:	Split Steel
Cutter Deck Belts:	B-section with Kevlar Cord. Self-adjusting, Self-tightening
Electric Clutch Type	Ogura Heavy Duty PTO Clutch Brake

3.6 HYDRAULIC SYSTEM

Hydraulic Oil Filter	40 Micron Spin-on Element Type
Hydraulic Reservoir	Nylon

3.7 PRODUCTIVITY

The following chart will aid you in determining how many acres your Scag mower will cut per day.

The chart is an estimate based on 8 hours per day cutting time at 6 MPH with a 20% allowance for overlap and turns.

Cutting Width:	48"	52"
Acres Per Day:	18.6	20.2

11