Scag Power Equipment STT61V-25KBD Operating Instructions, Controls and Instrument Identification

LEFT STEERING

CONTROL

R

Section 4

OPERATING INSTRUCTIONS

caution

Do not attempt to operate this mower unless you have read this manual. Learn the location and purpose of all controls and instruments before you operate this mower.

4.1CONTROLS AND INSTRUMENT IDENTIFICATION

2.Mower Deck Switch (Figure 4-1). Used to engage and disengage the mower drive system. Pulling up on the switch will engage the deck drive. Pushing down on the switch will disengage the deck drive.

3.Glow Plug Indicator (Figure 4-1). Yellow indicator turns on when the key switch is turned to the PREHEAT position. Glow plugs must be preheated for 5 to 10 seconds before starting the engine.

4.Engine Throttle Control (Figure 4-1). Used to control the engine speed. Pushing the lever forward increases engine speed. Pulling the lever back decreases engine speed. Full back position is the IDLE position. Full forward is the cutting position.

Before operating the mower, familiarize yourself with all mower and engine controls. Knowing the location, function and operation of these controls is important for safe and efficient operation of the mower.

1.Ignition Switch (Figure 4-1). The ignition switch is used to start the engine. The ignition switch for the STT-28CAT-SS has four positions; PREHEAT, OFF, ON, and START. The ignition switch for the STT61V-25KBD-SS has three positions; OFF, ON / PREHEAT, and START

5.Voltmeter (Figure 4-1).Indicates the condition of the charging system. When the engine is running, in normal operating conditions, the needle should be in the 12 to 14 volt range.

6.Oil Pressure (Figure 4-1). Indicates engine oil pressure. Reference the engine operator's manual for further information.

DECK LIFT

PARKING BRAKE

CONTROL

WATER TEMPERATURE

MOWER DECK SWITCH

OIL PRESSURE		MOWER DECK PULL OUT TO ENGAGE	PUSH IN TO DISENGAGE
GLOW PLUG INDICATOR	ON START
	OFF PREHEAT	GLOW	PLUGS	ENGINE
				THROTTLE
				CONTROL
IGNITION SWITCH

C

CUTTING HEIGHT

ADJUSTMENT

RIGHT STEERING

CONTROL

DECK RELEASE

SEAT BELT

483762

FUSES

VOLTMETER

DUMP VALVE

FUEL GAUGE

HOURMETER

Figure 4-1. Controls and Instruments

12