English

CAUTION: Make all connections before plugging the Unit into an AC power outlet.

Connecting the Speakers

For each speaker, connect one end of the speaker wire to the speaker terminals on the back of the System.

1.Open each of the terminals and insert the speaker wires firmly, then close the terminals.

2.Connect the red (+) and black (–) terminals of the right side speaker to the red (+) and black (–) terminals marked RIGHT on the System.

Connect the red (+) and black (–) terminals of the left side speaker to the red (+) and black (–) terminals marked LEFT on the System.

SPEAKERS

CAUTION:

SPEAKER IMPEDANCE

RIGHT

LEFT

6 – 16 OHMS.

 

+

+

SP-MXJ111V right

SP-MXJ111V left

IMPORTANT: Use speakers with the correct impedance only.

The correct impedance is indicated on the back panel.

Connecting Auxiliary Equipment

When you connect the Unit to TV

VIDEO

OUT

Video in

Connect TV to VIDEO OUT

To play back pictures on your TV.

When you connect the Unit to VCR and TV

Connect VCR or other equipment to AUX IN

To listen to this source, press the AUX button.

 

AUX

 

Audio out

Connect VCR to TV

 

 

 

 

IN

 

 

so that you can view

RIGHT

LEFT

 

 

the pictures on the

VIDEO

LINE

 

 

TV screen.

OUT

OUT

Audio in

Video in

Video out

 

Connect VCR to LINE OUT and VIDEO OUT

Video in

To record Video CDs and CD-Gs on the VCR, connect VIDEO

OUT and LINE OUT to VCR.

Note: the LINE OUT jacks will transmit audio signals from the selected TAPE, CD or TUNER, to the connected equipment. No audio signal comes out from the AUX IN jacks to the LINE OUT jacks.

5

Page 10
Image 10
JVC MX-J111V manual Connecting the Speakers, Connecting Auxiliary Equipment, When you connect the Unit to TV