Section 6

R

Neutral Adjustment

1.Be sure the dump valve levers are in the run position and the steering control levers are in the neutral lock position.

2.With an operator in the seat, start the engine and disengage the parking brake.

3.Run the engine at full operating speed and check if the machine creeps forward or backwards.

4.Adjust the RH wheel by loosening the jam nuts on the steering control rod and turning the rod until the drive wheel turns in the forward direction. Turn the rod back until the drive wheel stops moving. Turn the rod an additional 1/2 turn. See Figure 6-3.

STC2002SCRA

JAM

JAM

NUTS

NUTS

 

ADJUST

ADJUST

HERE

HERE

RIGHT STEERING

LEFT STEERING

CONTROL ROD

CONTROL ROD

Figure 6-3. Steering Control Rod Adjustment

5.Tighten the jam nuts and repeat for the LH wheel. See Figure 6-3.

6.Actuate the steering control levers forward and reverse several times and return them to the neutral position.

7.Check that the drive wheels remained in neutral and readjust if necessary.

8.Check that the steering control levers hit the stop before the pumps reach full stroke. Adjust as needed.

Tracking Adjustment

Caution

Stop the engine and remove the key from the ignition before making any adjustments. Wait for all moving parts to come to a complete stop before beginning work.

Caution

The engine and drive unit can get hot during operation causing burn injuries. Allow engine and drive components to cool before making any adjustments.

- NOTE -

Before proceeding with this adjustment, be sure that the caster wheels turn plus pivot freely and that the tire pressure in the drive wheels is correct. If the tire pressure is not correct, the machine will pull to the side with the lower pressure.

1.If at full speed the mower pulls right, it is an indication that the left wheel is turning faster than the right wheel. To adjust this condition, proceed as follows:

A. Stop the machine and place the steering control levers in the neutral position. Loosen the lock nuts securing the ball joints at each end of the LH steering control rod. Rotate the control rod to lengthen the rod and tighten the lock nuts. This will cause the control rod to stroke the LH pump less, slowing down the LH wheel. See Figure 6-3.

- NOTE -

If after making the adjustment as outlined in step 1A, the machine creeps forward or backward, perform the neutral adjustment. See Neutral Adjustment above.

23

Page 26 Page 28
Page 27
Image 27
Scag Power Equipment STWC52V-26KA-LC, STWC52V-25KA, STWC61V-26KA-LC, STWC61V-27CV Neutral Adjustment, Tracking Adjustment
Page 26 Page 28

STWC61V-25KA-LC, STWC61V-27CV, STWC52V-26KA-LC, STWC61V-26KA-LC, STWC52V-25KA specifications

Scag Power Equipment is a renowned name in the commercial and residential landscaping industry, and its STWC series stands out for exceptional performance and reliability. The STWC52V-26KA-LC, STWC61V-25KA-LC, STWC52V-25KA, STWC61V-26KA-LC, and STWC61V-27CV models exemplify the brand’s commitment to quality and innovation, providing operators with high-performance solutions for lawn care and maintenance.

One of the primary features of these models is their robust engine options. Designed with powerful Kawasaki or Kohler engines, these mowers deliver impressive horsepower, enabling efficient cutting performance across various terrains. The STWC series is engineered for durability, with a heavy-duty steel chassis that withstands the rigors of professional use while providing stability and support.

A critical characteristic of these mowers is their cutting deck options, offered in different sizes such as 52 and 61 inches. They feature a precision-engineered deck design that ensures a clean, even cut, reducing the need for multiple passes. The high-performance blades are made from hardened steel, maintaining their sharpness longer and enhancing cutting efficiency.

In addition to their cutting capabilities, the STWC series incorporates advanced technology for ease of operation and comfort. These models are equipped with ergonomic control panels, allowing operators to easily adjust speed and cutting height. The adjustable cutting height ensures adaptability to different grass conditions, providing versatility in landscaping projects.

Technologically, the STWC mowers utilize a fully hydraulic drive system, providing smooth and responsive maneuverability. This feature enhances the machines' ability to navigate tight corners and obstacles, making them ideal for residential lawns and commercial properties alike. Operators can enjoy precise control and increased productivity, thanks to the intuitive handling.

Moreover, these models prioritize user comfort with features such as padded seat designs, vibration-dampening systems, and easy access to controls. The suspension seats are not only comfortable for prolonged use but also help reduce operator fatigue, allowing for extended work hours without discomfort.

In summary, the Scag Power Equipment STWC mowers combine powerful engines, durable construction, and advanced technological features to deliver outstanding performance. Their design is tailored for professionals seeking reliable, efficient, and user-friendly equipment for all landscaping tasks, making them a solid investment in maintaining pristine outdoor spaces. Whether for commercial or residential use, these mowers are sure to exceed expectations.
Top Page Image Contents