R

Section 7

C. Changing Hydraulic Oil Filter Element

The hydraulic oil filter should be changed after every 500 hours of operation or annually, whichever occurs first.

1.Remove the oil filter element and properly discard it. See Figure 7-3. Fill the new filter with clean oil and install the filter. Hand tighten only.

2.Run the engine at idle speed with the speed control lever in neutral for five minutes.

3.Check the oil level in the hydraulic tank. It must be 3-1/4" inches from the top of the filler neck. If necessary, add SAE 20W50 motor oil.

7.4 Engine Oil

ENGINE OIL

ENGINE OIL

FILLER

DRAIN PLUG

 

 

ENGINE OIL

 

FILTER

Figure 7-4. Engine Oil Fill/Dipstick, Filter and Drain

Locations

A. Checking Engine Crankcase Oil Level

The engine oil level should be checked after every 8 hours of operation or daily as instructed in the Engine Operator’s Manual furnished with this mower.

B. Changing Engine Crankcase Oil

After the first 20 hours of operation, change the engine crankcase oil and replace the oil filter. Thereafter, change the engine crankcase oil after every 100 hours of operation or bi-weekly, whichever occurs first. Refer to the Engine Operator’s Manual furnished with this mower for instructions.

C. Changing Engine Oil Filter

After the first 20 hours of operation, replace the engine oil filter. Thereafter, replace the oil filter after every 200 hours of operation or every month, whichever occurs first. Refer to Engine Operator’s Manual for instructions. See Figure 7-4.

7.5 Engine Fuel System

DANGER

To avoid injury from burns, allow the mower to cool before removing the fuel tank cap and refueling.

A. Filling the Fuel Tank

Fill the fuel tank at the beginning of each operating day to within one (1) inch below the filler neck. Do not overfill. Use clean, fresh unleaded gasoline with a minimum octane rating of 87 and a maximum of 10% Ethanol.

DO NOT use E85 Fuel. Using E85 Fuel will cause severe damage to the engine.

To avoid personal injury or property damage, use extreme care in handling gasoline. Gasoline is extremely flammable and the vapors are explosive.

1.Extinguish all cigarettes, cigars, pipes and other sources of ignition.

2.Use only an approved gasoline container.

3.Never remove the gas cap or add fuel with the engine running. Allow the engine to completely cool before fueling.

4.Never fuel the machine indoors or in an enclosed trailer.

5.Never store the machine or fuel container where there is an open flame, spark or pilot light such as on a water heater or other appliances.

6.Never fill containers inside a vehicle or on a truck or trailer bed with a plastic liner. Always place containers on the ground away from your vehicle before filling.

32

Page 36
Image 36
Scag Power Equipment STWC61V-26KA-LC, STWC52V-25KA, STWC52V-26KA-LC, STWC61V-27CV manual Engine Oil, Engine Fuel System

STWC61V-25KA-LC, STWC61V-27CV, STWC52V-26KA-LC, STWC61V-26KA-LC, STWC52V-25KA specifications

Scag Power Equipment is a renowned name in the commercial and residential landscaping industry, and its STWC series stands out for exceptional performance and reliability. The STWC52V-26KA-LC, STWC61V-25KA-LC, STWC52V-25KA, STWC61V-26KA-LC, and STWC61V-27CV models exemplify the brand’s commitment to quality and innovation, providing operators with high-performance solutions for lawn care and maintenance.

One of the primary features of these models is their robust engine options. Designed with powerful Kawasaki or Kohler engines, these mowers deliver impressive horsepower, enabling efficient cutting performance across various terrains. The STWC series is engineered for durability, with a heavy-duty steel chassis that withstands the rigors of professional use while providing stability and support.

A critical characteristic of these mowers is their cutting deck options, offered in different sizes such as 52 and 61 inches. They feature a precision-engineered deck design that ensures a clean, even cut, reducing the need for multiple passes. The high-performance blades are made from hardened steel, maintaining their sharpness longer and enhancing cutting efficiency.

In addition to their cutting capabilities, the STWC series incorporates advanced technology for ease of operation and comfort. These models are equipped with ergonomic control panels, allowing operators to easily adjust speed and cutting height. The adjustable cutting height ensures adaptability to different grass conditions, providing versatility in landscaping projects.

Technologically, the STWC mowers utilize a fully hydraulic drive system, providing smooth and responsive maneuverability. This feature enhances the machines' ability to navigate tight corners and obstacles, making them ideal for residential lawns and commercial properties alike. Operators can enjoy precise control and increased productivity, thanks to the intuitive handling.

Moreover, these models prioritize user comfort with features such as padded seat designs, vibration-dampening systems, and easy access to controls. The suspension seats are not only comfortable for prolonged use but also help reduce operator fatigue, allowing for extended work hours without discomfort.

In summary, the Scag Power Equipment STWC mowers combine powerful engines, durable construction, and advanced technological features to deliver outstanding performance. Their design is tailored for professionals seeking reliable, efficient, and user-friendly equipment for all landscaping tasks, making them a solid investment in maintaining pristine outdoor spaces. Whether for commercial or residential use, these mowers are sure to exceed expectations.