Problem |
| Possible solutions (continued) |
| |
|
| Sometimes the colors are not correct because your VGA or DVI cable | ||
THE COLORS ARE |
| is loose or corrupt. Please try reconnecting your cable or swap out | ||
NOT CORRECT |
| your current cable to see if the problem persists. Afterwards please | ||
|
| use the AUTO COLOR function inside the OSD to recalibrate the | ||
|
| colors. |
|
|
|
|
| ||
|
| At the native resolution of 1920x1080, some people might feel that the | ||
THE WORDS ARE TOO |
| words are too small to read. You can change the size of the words in | ||
SMALL AT 1920X1080 |
| Windows Operating System via its display properties. |
| |
|
| For Windows XP |
| |
| 1. | Right click on the background with nothing selected. | Left | |
|
|
| click on the PROPERTIES option. |
|
| 2. | Click on the SETTINGS tab. |
| |
| 3. | Under SETTINGS, click on the ADVANCED button. |
| |
| 4. | Under GENERAL tab, change the size of the words by |
| |
|
|
| selecting the option NORMAL SIZE and change it to LARGE | |
|
|
| SIZE. |
|
| 5. | Click on OK on all windows to exit. |
| |
| 6. | Once you have finished rebooting, the computer is ready for | ||
|
|
| use. |
|
|
| For Windows VISTA |
| |
| 1. | Right click on the background with nothing selected. | Left | |
|
|
| click on the PERSONALIZE option. |
|
| 2. | Click on ADJUST FONT SIZE (DPI) option on the left |
| |
|
|
| column and |
|
| 3. | Click on CONTINUE. |
| |
| 4. | In there you can change the size of the words by changing | ||
|
|
| from the option DEFAULT SCALE to LARGE SCALE. |
|
| 5. | Click on APPLY to finalize your selection. |
| |
| 6. | Once you have finished rebooting, the computer is ready for | ||
|
|
| use. |
|
|
|
| ||
I CANNOT ADJUST |
| Check the OSD to see if DCR is turned on. If DCR is turned on, you | ||
THE BRIGHTNESS |
| will not be able to adjust the BRIGHTNESS option. With DCR turned | ||
SETTINGS |
| off you will be able to adjust those options. |
| |
MY X24 DOES NOT |
| The HDMI port is an optional design that is only available in certain | ||
HAVE THE HDMI PORT |
| models. |
|
|
THE X24 WITH HDMI |
| If your sound has static, check your video device to make sure that the | ||
PORT IS TOO LOW OR |
| digital sound output is on PCM. |
| |
HAS NOTHING BUT |
| If your sound is too low, this might be because the HDMI’s sound | ||
STATIC |
| |||
|
| output is a pure digital signal. This is the design of digital sound | ||
|
| signals and you’ll need to have an independent set of self powered | ||
|
| speakers to hear well. |
| |
Page48 | SCEPTRE X24 |
