SCEPTRE X24 Page5
Tips and Safety Precautions This product is designed and manufactured to operate within defined design limits, and
misuse may result in electric shock or fire. To prevent the product from being damaged, the
following rules should be observed for the installation, use and maintenance of the product.
Read the following safety instructions before operating the display. Keep these instructions
in a safe place for future reference.
• To avoid the risk of electric shock or
component damage, switch off the
power before connecting other
components to the X24 LCD
MONITOR.
• Unplug the power cord before
cleaning the X24 LCD MONITOR. Do
not use a liquid or a spray cleaner for
cleaning the product. Do not use
abrasive cleaners.
• Always use the accessories
recommended by the manufacturer to
insure compatibility.
• When moving the X24 LCD
MONITOR from an area of low
temperature to an area of high
temperature, condensation may form
on the housing. Do not turn on the
X24 LCD MONITOR immediately after
this to avoid causing fire, electric
shock or component damage.
• Do not place the X24 LCD MONITOR
on an unstable cart, stand, or table. If
the X24 LCD MONITOR falls, it can
injure a person and cause serious
damage to the appliance. Use only a
cart or stand recommended by the
manufacturer or sold with the X24
LCD MONITOR.
• Any heat source should maintain a
distance of at least 5 feet away from
the X24 LCD MONITOR, i.e. radiator,
heater, oven, amplifier etc. Do not
install the product too close to
anything that produces smoke or
moisture. Operating the product close
to smoke or moisture may cause fire
or electric shock.
• Slots and openings in the back and
bottom of the bezel are provided for
ventilation. To ensure reliable
operation of the X24 LCD MONITOR
and to protect it from overheating, be
sure these openings are not blocked
or covered. Do not place the X24 LCD
MONITOR in a bookcase or cabinet
unless proper ventilation is provided.
• It is not recommended to use the X24
LCD MONITOR in a portrait format
(by rotating 90 degrees) under high
temperature environment (25°C or
higher), since this would retard heat
dissipation and would eventually
damage the monitor.
• Never push any object into the
ventilation slots of the X24 LCD
MONITOR. Do not place any objects
on the top of the Product. It could
short circuit parts causing a fire or
electric shock. Never spill liquids on
the X24 LCD MONITOR.
• The X24 LCD MONITOR should be
operated only from the type of power
source indicated on the label. If you
are not sure of the type of power
supplied to your home, consult your
dealer or local power company.
• The power cable must be replaced
when using different voltage from that
specified in the User Manual. For
more information, contact your dealer.