I/O Connector Definitions

1.AC Power

This connection is for providing power to the TV. This connection uses a standard computer power cord.

2.TV Tuner

This connection port is used for connecting antenna, satellite box or cable service via TV source. If you are using a satellite box, select cable as your cable/air setting. If you are connecting for cable service or antenna, please don’t forget to switch for the correct setting under TV setup and scan for the channels. This connection uses a coaxial cable.

3.Service Port

This is used for factory service by SCEPTRE’s technicians (do not tamper with this port).

4.AV1 & AV2

These connection ports are used for connecting composite devices, such as VCR, DVD player, game console, or set-top box via AV1 or AV2 source. Use the connectors white (L) and red (R) for audio and the yellow (AV) for video. You can also substitute the yellow (AV) by using the black connector (S-VIDEO) for a better picture. Please note you can only connect one type of video connector at a time. Please do not connect both S-VIDEO and AV at the same time. This connection uses RCA audio cable for sound, composite cable for video or s-video cable for video.

5.Line Out

This connection port is used for sending out audio signals to other audio devices such as stereo/surround sound receivers and sending out video signals to other video device such as TV monitor or VCR. The red (R) and white (L) connectors sends out the audio signal. The yellow (AV OUT) connector sends out the video signal. The black (SUBWOOFER OUT) connector sends out bass signals to a subwoofer. This connection uses RCA audio cable for sound, composite cable for video, and a subwoofer cable for bass.

SCEPTRE X37

Page19

Page 19
Image 19
Sceptre Technologies X37 specifications Connector Definitions