Sceptre Technologies X37 specifications Page82

Problems	Possible solutions
TV is turned on, stand	￿This is a big LCD screen, and needs time to warm up to show
by light is blue but no	the picture.
picture	￿Please wait for 15-30 seconds for the picture to show up.
	￿Is your video card’s DVI port turned off by default?
No Picture on PC (DVI	￿Go into your video card’s advance menu to make sure 2nd
port)
	monitor / DVI port is turned on.
No Sound on PC	Make sure your green connector head audio cable is connected.
	￿Reboot your satellite / digital cable box by turning them off
Satellite / Digital Cable
	then unplugging the power cord.
box says HDCP not	￿Wait for at least 1-3 minutes and plug them back into the wall
compatible.
	and turn on the power.
Satellite / Digital Cable	￿Make sure you’re using the HDMI->HDMI cable.
box has no video on	￿If you’re using the cable we’ve included in the box, then you
HDMI port.	should set your source to HDCP or DVI.
	Although the screen’s max resolution is 1366x768. No video
Cannot get 1366x768
	card maker can support that resolution. The widely support
on PC.
	resolution is 1360x768, please use that as your resolution.
	If you suddenly terminate the TV’s power by unplugging the TV
I lost all my scanned in
	without turning it off first, you will lose the channels. Please
channels.
	re-scan all channels to get them back.

Page82 SCEPTRE X37