Sceptre Technologies X37 specifications About Control Keys, Page16

Side View

About Control Keys

Power on/off – Please note this is a passive power button and doesn’t physically cut power off the TV but turn the TV into standby mode. When turning LCD on/off, wait 5-10 seconds before pressing the power button again.

Press this button to select among the following Video inputs – TV, AV1, AV2, YPbPr1(Component1), YPbPr2(Component2).

Press this button to select among the following PC or DTV inputs – DTV, HDMI, HDCP, DVI, VGA-PC. Please note HDMI, HDCP, and DVI are physically shared under the same HDMI port.

Press the VOL buttons to adjust the audio volume.

Press the CH buttons to switch between preprogrammed channels. If you are using DTV to view your television you can also use the EPG button to navigate your channels.

Page16 SCEPTRE X37