APC Worldwide Customer Support | Schneider Electric 3000, 5000

Image 19

Schneider Electric 3000, 5000 user manual APC Worldwide Customer Support, Radio Frequency Warnings, Regulatory

Contents

User Manual Uninterruptible Power Supply3000/5000/6000 VA 200-240 Vac Tower/Rack Mount 3U Smart-UPS RTPage Introduction SpecificationsINSTALLATION Read the Safety Guide before installing the UPS Wiring and Connecting the UPS CONNECTING THE BATTERY MODULES AND ATTACHING THE FRONT BEZEL Use only interface kits supplied or approved by APC connectorWhen connecting grounding cable, disconnect the unit from the utility power outlet 2. Avoid using extension cords OPERATION The UPS starts a self-test as part of this procedure. The self-test On Battery Operationdoes not affect the voltage display FACTORY USER CONFIGURABLE ITEMSDEFAULT FUNCTION Adhere to National and local electrical codes when wiring the EPO 9 bits per second 9 data - bits 9 parity - none 9 stop bit Services9 flow control - none 5000/6000 VA models X YZ \ Replacing the Battery ModuleMAINTENANCE AND TRANSPORT Be careful during battery replacement, the battery modules are heavy The batterys may remain in the UPS Disconnecting the Battery for TransportREPLACING BATTERY MODULES CAUSE TROUBLESHOOTING, SERVICE, AND WARRANTY INFORMATIONPROBLEM AND POSSIBLE SOLUTION UPS OPERATES ON BATTERY ALTHOUGH NORMAL LINE VOLTAGE EXISTS FAULT AND OVERLOAD LEDS ILLUMINATE, UPS EMITS A SUSTAINED ALARM TONEFAULT LED ILLUMINATES REPLACE BATTERY LED ILLUMINATES Limited Warranty Service Radio Frequency Warnings APC Worldwide Customer SupportREGULATORY