Operation | Schneider Electric 5000, 3000 specs

Image 8

Contents

Uninterruptible Power Supply 3000/5000/6000 VA 200-240 Vac Tower/Rack Mount 3USmart-UPS RT User ManualPage Specifications INSTALLATIONRead the Safety Guide before installing the UPS Introduction Wiring and Connecting the UPS CONNECTING THE BATTERY MODULES AND ATTACHING THE FRONT BEZEL connector When connecting grounding cable, disconnect the unit from the utilitypower outlet Use only interface kits supplied or approved by APC 2. Avoid using extension cords OPERATION does not affect the voltage display On Battery OperationThe UPS starts a self-test as part of this procedure. The self-test USER CONFIGURABLE ITEMS DEFAULTFUNCTION FACTORY Adhere to National and local electrical codes when wiring the EPO 9 flow control - none Services9 bits per second 9 data - bits 9 parity - none 9 stop bit 5000/6000 VA models Replacing the Battery Module MAINTENANCE AND TRANSPORTBe careful during battery replacement, the battery modules are heavy X YZ \ REPLACING BATTERY MODULES Disconnecting the Battery for TransportThe batterys may remain in the UPS TROUBLESHOOTING, SERVICE, AND WARRANTY INFORMATION PROBLEM AND POSSIBLESOLUTION CAUSE FAULT AND OVERLOAD LEDS ILLUMINATE, UPS EMITS A SUSTAINED ALARM TONE FAULT LED ILLUMINATESREPLACE BATTERY LED ILLUMINATES UPS OPERATES ON BATTERY ALTHOUGH NORMAL LINE VOLTAGE EXISTS Service Limited Warranty REGULATORY APC Worldwide Customer SupportRadio Frequency Warnings