B.

PERSONAL PRECAUTIONS AND SAFETY

1.WARNING: Wear complete eye protection and clothing pro- tection when working with lead-acid batteries.

2.Make sure someone is within range of your voice or close enough to come to your aid when you work with or near a lead-acid battery.

3.Have plenty of fresh water and soap nearby for use if battery acid contacts skin, clothing, or eyes. If battery acid contacts skin or clothing, wash immediately with soap and water.

4.Avoid touching your eyes while working with a battery. Acid particles (corrosion) may get into your eyes! If acid enters your eye, immediately flood eye with running cold water for at least 10 minutes. Get medical attention immediately.

5.Remove all personal metal items such as rings, bracelets, necklaces, and watches when working with a lead-acid bat- tery. A lead-acid battery can produce a short-circuit current

high enough to weld a ring (or the like) to metal, causing a severe burn.

6.Take care not to drop a metal tool or other metal onto the battery. Metal may cause sparking or short circuit the bat- tery or another electrical device. Sparking may cause an explosion.

7.Always operate battery charger in an open, well- ventilated area.

8.NEVER smoke or allow a spark or flame in the vicinity of the battery or engine. Batteries generate explosive gases!

C.

PREPARING TO CHARGE

1.Make sure you have a 12 volt lead-acid battery. Check ve- hicle owner manual to make sure.

2.Clean battery terminals. Take care to keep corrosion from coming in contact with your eyes.

3.If required, add distilled water in each cell until battery acid reaches levels specified by battery manufacturer. This helps purge excessive gas from cells. Do not overfill. For a battery without cell caps, carefully follow manufacturer's recharg- ing instructions.

4.Study all battery manufacturer's specific precautions, such as removing or not removing cell caps while charging, and recommended rates of charge.

5.Be sure area around battery is well ventilated while battery is being charged. Gas can be forcefully blown away by us- ing a piece of cardboard or other non-metallic material as a fan.

6.If necessary to remove battery from vehicle to charge, al- ways remove grounded terminal from battery first. Make sure all accessories in the vehicle are off, so as not to cause an arc.

7.A marine (boat) battery must be removed and charged on shore. To charge it on board requires equipment specially designed for marine use.

 

BATTERY

RATING

RECHARGE

 

SIZE

TIME-HOURS*

 

 

 

 

 

 

CARS / LIGHT

CCA

R C

 

TRUCKS

315-550

60-85

2.5-3.0

 

550-850

85-150

3.0-5.0

 

 

 

 

MARINE OR

MCA

AH

 

DEEP CYCLE

350-600

60-70

4.0-5.0

 

600-935

70-104

5.0-6.5

 

 

 

 

CCA: COLD CRANKING AMPS

RC: RESERVE CAPACITY

MCA: MARINE CRANKING AMPS

AH: AMPERE HOUR

*Based on battery at 50% charge.

2

Page 1 Page 3
Page 2
Image 2
Schumacher SS-120A-PE owner manual Personal Precautions and Safety, Preparing to Charge, Marine or MCA Deep Cycle
Page 1 Page 3

SS-120A-PE specifications

The Schumacher SS-120A-PE is a compact and versatile battery charger and maintainer designed for a variety of battery types and applications. Whether for automotive, marine, or other deep-cycle batteries, this unit stands out due to its efficiency and ease of use.

One of the primary features of the SS-120A-PE is its ability to charge 12V lead-acid batteries, including standard flooded, gel, and AGM (Absorbent Glass Mat) types. With a robust charging capacity of 12 amps, the unit can efficiently restore and maintain battery health, ensuring reliable performance for everyday use.

The SS-120A-PE utilizes advanced microprocessor technology, allowing for smart charging and maintenance. This intelligent system automatically adjusts the charging rate as needed, helping to prevent overcharging and extending the lifespan of your batteries. The integrated maintenance mode ensures that the battery stays charged while being left unattended, making it an ideal choice for seasonal vehicles like boats or motorcycles.

Safety features are paramount in the design of the Schumacher SS-120A-PE. It comes equipped with short-circuit, overload, and reverse polarity protection. These features not only safeguard the charger itself but also protect the battery being charged, giving users peace of mind during operation.

Another notable characteristic of the SS-120A-PE is its compact design, which allows it to be easily stored or transported. Weighing in at a manageable size, it is user-friendly and perfect for both home use and professional environments. The built-in LEDs keep users informed of the charging status, with clear indicators for when charging is complete.

Furthermore, this model offers a versatility that resonates with users across a broad spectrum. From jump-starting a vehicle to maintaining the optimal charge of a stored battery, the Schumacher SS-120A-PE is designed to meet varying needs seamlessly.

In conclusion, the Schumacher SS-120A-PE is a feature-rich battery charger and maintainer that stands out in its category. Its intelligent charging technology, safety features, and user-friendly design make it an essential tool for anyone looking to maintain battery health reliably and effectively. Whether it's for personal hobby use or professional maintenance, this unit shines in its capability to deliver consistent performance.
Top Page Image Contents