Schwinn 202 manual Instructions, Assembly Stage #1, Assemble Seat and Handle Bar

Instructions

IMPORTANT!: To ensure ease of assembly please verify the size and quantity of all the required assembly hardware and parts with the enclosed parts list and full size hardware chart.

Each step of the assembly process has been broken down into 5 easy-to-follow stages. Please take just a few moments to read over these instructions to familiarize yourself with the process to make assembly quick and trouble-free.

Assembly Stage #1

Assemble Seat and Handle Bar

Assembly hardware required:	(8)	M8	Allen Bolts 45 mm long (item #1)
	(8)	Flat Washers Ø8*Ø19*2T (item #2)
	(4)	M8	Allen Bolts 16 mm long (item #22)
	(4)Flat Washer Ø8* Ø 16*2T(item #7)

Step 1: Attach HANDLEBAR ASSEMBLY (#6) to SEAT FRAME (#8) with the 4 ALLEN BOLTS (#22) and 4 FLAT WASHERS (#7). Tighten bolts with the provided Allen wrench.

Step 2: Attach SEAT (#4) to SEAT FRAME (#8) with 4 ALLEN BOLTS (#1) and 4 WASHERS (#2). Tighten Bolts.