Schwinn 240, 140 manual LCD Display Data

LCD Display Data

AA1	Program Display	AA5	PULSE
AA2	TIME / INTERVAL	AA6	DISTANCE
AA3	WATT / LEVEL	AA7	SPEED / RPM KM
AA4	CALORIES

Note: To change the measurement units to English Imperial or metric, refer to the “Console Setup Mode” section in this manual.

Program Display

The Program Display shows the name of the program selection and the dot-matrix area shows the course profile for the program. Each column in the profile shows one interval (1/40 of the total program time). The higher the column, the higher the resistance level and/or speed for that interval. The flashing column shows your current interval.

Time/Interval

The TIME/INTERVAL display field shows the time count in the workout. If no preset time is set up for the current workout program, the display value starts at zero and counts forward until the end of the workout. Maximum time is 99:59.

If the workout has a preset time, the display starts at the preset value and counts down to zero. The display shows the total time count for the workout, then the time count for the current interval.

Watt/Level

The WATT/LEVEL display field shows the power that you are producing at the current resistance level (1 horsepower = 746 watts) for 6 seconds, the resistance level (1–16) for 6 seconds.

8