Scientific Atlanta Digital Home Communications Terminal Activating and Deactivating RF Bypass

Optional Devices, continued

VCR

OUT TO IN FROM

TV ANT.

6

TV

CABLE/ ANTENNA

Cable Input

From Wall

7

Activating and Deactivating RF Bypass

If your remote control includes a Bypass key, follow these instructions to use the Bypass feature.

To activate the Bypass feature, press the Bypass

key. The Bypass indicator illuminates on the DHCT.

MODEL E2051-X01CABLE COMMUNICATIONS

CABLE IN

	TO			LISTED		RISK
CABLE	TV
			BYPASS		DONOTOPEN	OFELECTRICALSHOCK	CAUTION
OUT				C
	FROM		CABLE	14141
		5
	VCR		INPUT	120 VAC	120 VAC
				60Hz 40W	60Hz 5A

Bypass Module Attached to
EXPLORER DHCT	T8620

5Align the mounting tabs with the screw holes. Tighten the screws; do not overtighten.

6Connect to your TV and VCR.

7Connect your cable input from the wall.

8Connect any additional devices, if applicable.

9Do you have other devices to connect?

•If yes, see page 9 to locate other connec- tion diagrams appropriate for your system.

•If no, plug in the power cord to an AC power outlet.

Notes:

•You can only view analog channels; digital channels are not available while the Bypass feature is active.

•Use the Bypass key to toggle the feature on and off.

To deactivate the Bypass feature:

1.Press the Bypass key on the remote control. The Bypass indicator no longer illuminates on the Explorer DHCT.

2.Tune your TV using one of the following methods:

•If the TV/VCR switch on your VCR is in the VCR position, you must tune your TV to the VCR output channel (channel 3 or 4). You can view a tape, or you can view the channel to which the Explorer DHCT is tuned.

•If the TV/VCR switch on your VCR is in the TV position, you must tune your TV to the Explorer DHCT output channel (channel 3 or 4). You can only view programs from the Explorer DHCT, regardless of what your VCR is playing.

15