Getting Started
Installation Overview
The following list provides an overview of the installation process.
1.Determine the electronic devices you must connect using the information on page 9.
2.Connect the DHCT and your electronic devices using the diagrams in this guide, based upon the information on page 9.
3.Plug in the DHCT to an AC power source, but do not press the Power key on the DHCT.
4.Set the input channel (3 or 4) on your TV and VCR.
5.Wait for the time to display on the LED. Then, press the Power on the DHCT. See page 28 for detailed instructions.
6.Program your remote control to operate your TV and VCR. (See your remote control user’s guide.)
7.Use the IPG to browse and view your program preferences. (See the IPG user’s guide.)
Installation Tips
Follow these tips for proper DHCT operation:
•Do not plug the DHCT into a wall outlet that is controlled by a wall switch. The IPG data does not update when the outlet is switched to the off position.
•You can plug your TV into the AC Switched Outlet on the back of the DHCT.
•To ensure proper ventilation, do not place any objects on top of the DHCT, including devices such as your TV.
•If your TV is equipped with a
7
