Configure TCP/IP, Continued
Windows 2000
Follow these steps to install and configure the TCP/IP protocol for Windows 2000 environments.
1.Click Start, select Settings, and choose Network and
2.In the Network and
Result: The Local Area Connection Status window opens.
3.In the Local Area Connection Status window, click Properties. Result: The Local Area Connection Properties window opens.
4.In the Local Area Connection Properties window, click Internet Protocol (TCP/IP), and then click Properties.
Result: The Internet Protocol (TCP/IP) Properties window opens.
5.In the Internet Protocol (TCP/IP) Properties window select both Obtain an IP address automatically, and Obtain DNS server address automatically; then, click OK.
6.When the Local Network window opens, click Yes to restart your computer.
Results:
•The computer restarts.
•The TCP/IP protocol is now configured on your PC and your cable modem and it is ready for use.
Note: If you cannot access the Internet, contact your cable service provider for further assistance.
Windows XP
Follow these steps to install and configure the TCP/IP protocol for Windows XP environments.
1.Click Start, select Connect to, and choose Show all connections. The Network Connections window opens.
2.In the LAN or
3.Follow steps 3 through 6 of the previous procedure, Windows 2000, in this section.
Continued on next page
20 | WebSTAR Model DPX213 VoIP DOCSIS Cable Modem User's Guide | 4001231 Rev A |
