Scientific Atlanta EPX2203, DPX2203 manual WebSTAR Cable Modem Back Panel, Back Panel Components

WebSTAR Cable Modem Back Panel

Back Panel Components

The following illustration describes the back panel components of the cable modem.

RESET 12VDC	POWER	1
TELEPHONY		2
		LINE 2LINE
		3
ETHERNET		1
		4

USB	5
CABLE	6

T10702

1POWER - Connects the cable modem to the DC output of the AC power adapter that is provided with your cable modem

Note: Only use the power cord and the AC power adapter that are provided with your cable modem.

2RESET – Reset-to-Default button (Factory Reset)

CAUTION: This button is for maintenance purposes only. Do not use unless instructed to do so by your cable or telephone service provider!

3LINE 1/LINE 2 – RJ-11 telephone ports connect to home telephone wiring to conventional telephones or fax machines

4ETHERNET - RJ-45 Ethernet port connects to the Ethernet port on your PC

5USB - 12 Mbps USB port connects to the USB port on your PC

6CABLE IN - F-Connector connects to an active cable signal from your cable service provider

CAUTION: Do not connect your PC to both the Ethernet and USB ports at the same time.

Note: You can connect two separate PCs to the cable modem at the same time by connecting one to the Ethernet port and one to the USB port. This dual- connection requires that you purchase two IP addresses from your ISP. See Internet Service: Install the Cable Modem, in Section D of this guide.

10 WebSTAR DPX2203 or EPX2203 VoIP Cable Modem User’s Guide 4004041 Rev A