WebSTAR DPX2203C and EPX2203C VoIP Cable Modem User’s Guide

Back Panel Description

The following illustration shows the description and function of the back panel components on the DPX2203C and EPX2203C.

LINE1 LINE2 RESET 15VDC

CABLE

USB

ETHERNET

POWER

 

 

 

TELEPHONY

1

2

3

4

5

6

T11672

IMPORTANT: Do not connect your PC to both the Ethernet and USB ports at the same time. Your modem will not function if both the Ethernet and USB ports are connected to your PC at the same time.

1CABLE—F-Connector connects to an active cable signal from your cable service provider

2USB—12 Mbps USB port connects to the USB port on your PC

3ETHERNET—RJ-45 Ethernet port connects to the Ethernet port on your PC or your home network

4LINE1/LINE2—RJ-11 telephone ports connect to home telephone wiring to conventional telephones or fax machines

5RESET—Activating this switch resets the unit to factory default values and reboots the cable modem

CAUTION: The Reboot EMTA button is for maintenance purposes only. Do not use unless instructed to do so by your cable or telephone service provider. Doing so may cause you to lose any cable modem settings you have selected.

6POWER—Connects the cable modem to the DC output of the AC power adapter that is provided with your cable modem

CAUTION:

Avoid damage to your equipment. Only use the AC power adapter and power cord that is provided with your cable modem.

10