WebSTAR DPX2203C and EPX2203C VoIP Cable Modem User’s Guide

To configure Windows 2000 systems

1.Click Start, select Settings, and choose Network and Dial-up Connections.

2.Double-click the Local Area Connection icon in the Network and Dial-up Connections window.

3.Click Properties in the Local Area Connection Status window.

4.Click Internet Protocol (TCP/IP) in the Local Area Connection Properties window, and then click Properties.

5.Select both Obtain an IP address automatically and Obtain DNS server address automatically in the Internet Protocol (TCP/IP) Properties window, and then click OK.

6.Click Yes to restart your computer when the Local Network window opens. The computer restarts. The TCP/IP protocol is now configured on your PC and your Ethernet devices are ready for use.

7.Try to access the Internet. If you cannot access the Internet, go to Having Difficulty, later in this guide. If you still cannot access the Internet, contact your cable service provider for further assistance.

To configure Windows XP systems

1.Click Start, select Connect to, and choose Show all connections.

2.Double-click the Local Area Connection icon in the LAN or High-Speed Internet section of the Network Connections window.

3.Click Properties in the Local Area Connection Status window.

4.Click Internet Protocol (TCP/IP), and then click Properties in the Local Area Connection Properties window.

5.Select both Obtain an IP address automatically and Obtain DNS server address automatically in the Internet Protocol (TCP/IP) Properties window, and then click OK.

6.Click Yes to restart your computer when the Local Network window opens. The computer restarts. The TCP/IP protocol is now configured on your PC and your Ethernet devices are ready for use.

7.Try to access the Internet. If you cannot access the Internet, go to Having Difficulty, later in this guide. If you still cannot access the Internet, contact your cable service provider for further assistance.

16