SCCG30 & SCCP30
Service Manual
Removal and Repair - Cabinet Removal
Certain components require the removal of the cabinet for repair access.
1.Shut machine off, if making ice, melt ice with hot water.
2.Remove all ice.
3.Drain reservoir.
4.Remove service panel and kick plate.
5.Remove back panel.
6.Disconnect electrical power.
Electrical Shock
Hazard.
Disconnect electrical power before beginning removal
12.Pull clip up and pull water inlet elbow out of inner elbow.
13.Push inner elbow back and rotate it until it points straight up, then push it back through the hole in the back of the freezing compartment.
Inlet Elbow
Inner
Elbow
Clip
7.Disconnect water and drain tubing.
8.Remove door.
9.Remove top panel.
10.Remove curtain & hanger.
14. Remove two screws holding freezing compartment brackets to cabinet, lift brackets up.
Bracket
11.Locate elbows where water flows onto the evaporator platen.
September 2009
Page 27
