SERVICE ENGINE
C
MX1529
7.Remove old filter (C) and wipe off filter tray with a clean cloth.
8.Lightly oil filter gasket with fresh, clean oil.
9.Install replacement oil filter. Turn oil filter to the right (clockwise) until rubber gasket contacts filter adapter. Tighten filter an additional
10.Remove dipstick (B) and refill with new oil of recommended grade. (See Engine Oil in this section.)
11.Check oil level. For correct procedure see Checking Oil Level in this section.
12.Oil level must be between ADD and FULL marks. Do not overfill.
13.Install and tighten dipstick. Lower hood.
14.Start engine and check for oil leaks. Correct any leaks before operating.
15.Run engine at idle for 30 seconds. Stop engine. Wait 30 seconds and check oil level.
16.If necessary, add oil to bring level to FULL mark on dipstick.
Checking and Cleaning Air Cleaner Elements
IMPORTANT: Avoid machine damage. To extend engine life, when operating mower in extreme heat, dust or other severe conditions, it may be necessary to check/replace air cleaner more frequently.
1.Lift hood.
2.Clean any dirt and debris from the air cleaner before removing cover.
3.Loosen knob (A) and remove cover (B).
A
B
Service Engine - Page 26
