REMOVING MOWER
Removing Mower
cCAUTION: Avoid injury. Before removing
mower on machine: STOP engine. Remove key. Wait for all moving parts to STOP.
• Mower lift lever under tension. To avoid injury, grasp lift lever securely and release lock slowly.
1.STOP engine, LOCK park brake, DISENGAGE PTO lever, turn key to the OFF position, and remove key.
2.Raise mower lift lever to highest position.
3.Put wood blocks under each side of mower.
4.Lower mower lift lever to lowest position, bringing deck down onto blocks.
5.Remove mower deck drive belt from tractor engine pulley.
B
AC
A
C
B
6.Remove spring locking pin and washer (A) holding tension rod (B) to blade drive arm (C).
E
D
E
D
7.Remove spring locking pins and washers (D) from front draft rods (E) and remove draft arms from front axle brackets. Store draft arms with mower.
F G
8.Remove spring locking pins and rear draft pins (F), one on each side, from rear draft brackets (G).
9.Raise mower deck lift lever to highest position and remove wood blocks.
10.Pull deck out from under tractor.
Removing Mower - Page 44
