Scotts S2546 Service Steering and Brakes, Grease, Wheel Spindles, Axle Pivot, Wheel Bearings

SERVICE STEERING AND BRAKES

Grease

				50°C	122°F
				40°C	104°F
				30°C	86°F
TempHighMoly	TempHighJD	GREASE-	GREASE-BIO-							NumberNGLI
				20°C	68°F			Number
				10°C	50°F
JD				0°C	32°F				NGLI
							Number
				- 10°C	14°F
				- 20°C	- 4°F	Arctic	NGLI
				- 30°C	- 22°F
				- 40°C	- 40°F
				- 55°C	- 67°F

TS1417

Use grease based on the expected air temperature range during the service interval.

The following greases may be used:

•SAE Multipurpose EP Grease with 3 to 5 percent molybdenum disulfide.

•SAE Multipurpose EP Grease.

•Greases meeting Military Specification

MIL-G-10924C may be used as arctic grease.

Lubricating Front Wheel Spindles, Wheel Bearings and Axle Pivot

B

C

A

B

Park tractor on flat, level surface. STOP engine, LOCK park brake, DISENGAGE PTO lever, turn key to the OFF position, and remove key.

With a safe lifting device, lift front of tractor just high enough to pivot axle.

Wheel Spindles

Lubricate wheel spindles (A), one on each side of tractor with multipurpose EP grease or an equivalent.

Turn steering wheel to a full left turn and then full right turn to distribute grease in spindles.

Axle Pivot

Lubricate axle pivot (C) with multipurpose EP grease or an equivalent.

Pivot axle up and down to distribute grease in pivot.

Wheel Bearings

Lubricate front wheel bearings (B), one on each side of tractor with multipurpose EP grease or an equivalent.

Spin wheels to distribute grease in bearings.

Lower front of tractor to ground.

Service Steering and Brakes - Page 29