Manuals / Scotts / Lawn and Garden / Lawn Mower

Scotts S2546 manual Charging the Battery

Models: S2546

1 67

Download 67 pages 30.47 Kb

Page 40

SERVICE ELECTRICAL

B

C

A

M96453

2.Remove rubber hold-down strap (A).

3.Disconnect BLACK (–) battery cable (B) first.

4.Disconnect RED (+) battery cable (C). Remove battery from mower.

5.Wash battery with solution of four tablespoons of baking soda to one gallon of water. Be careful not to get the soda solution into the cells.

6.Rinse the battery with clean water. Let dry.

7.Clean terminals and battery cable ends with wire brush until bright.

8.Apply petroleum jelly or silicone spray to terminal to prevent corrosion.

9.Install battery. (See Removing and Installing the Battery in this section and Connect the Battery in the Assembly section.)

Charging the Battery

cCAUTION: Avoid injury. BE VERY CAREFUL: Battery fluid (electrolyte), is a solution of water and sulfuric acid. It is very harmful to eyes, skin, or clothing.

-Wear goggles or an eye shield when you work with a battery.

-If the acid contacts your eyes, skin, or clothing, flush the area immediately with water. Get medical help, if necessary.

A battery gives off gas which can explode. An exploding battery will spray sulfuric acid in all directions.

-Keep cigarettes, sparks, and flames away from the battery.

-Charge the battery in an area with good ventilation.

-DO NOT charge a frozen battery.

Before you charge a battery:

•Wait until the battery has warmed to room temperature. Do not charge a frozen battery.

Turn OFF and unplug the charger before you connect cables to the battery or disconnect cables from the battery.

If the battery becomes warm to touch during charging:

•Reduce the charging rate OR

•Stop charging the battery until it cools.

NOTE: Your charger may have an AUTOMATIC STOP to prevent charging the battery:

•When the battery is fully charged OR

•When the battery is not in condition to take a charge.

cCAUTION: Avoid injury. DO NOT attempt to open, add fluid or service battery. Any attempt to do so will void warranty and lead to possible injury.Battery gas is explosive:

-DO NOT smoke while you charge battery.

-Keep all flames and sparks away.

-DO NOT charge frozen battery.

-DO NOT connect booster battery negative (-) cable to starting vehicle negative (-) terminal.

1.Remove battery from mower. (See Removing and Installing Battery in this section.)

Service Electrical - Page 37

Image 40

Scotts S2546 manual Charging the Battery

Contents

OPERATOR’S Manual Introduction Thank YOU for purchasing a Scotts productTable of Contents Connect and Check Battery AssemblyIdentify Parts Checking Tire Pressure Tire Size Pressure-kPa psiSafety Signs Safety-Alert SymbolMachine Safety Labels CertificationPicture Note Located on Right-Hand side of deck Picture Note Located on Battery under seatPicture Note Located on Left-Hand side of deck Controls Tractor ControlsOperate Safely Operating MachinePark Safely Avoid Tipping Keep Riders Off Wear Appropriate ClothingUsing the Park Brake Adjusting SeatTransport Safely Starting Engine Using Throttle ControlCold Weather Starting Tips Using Travel Controls Warming and Idling EngineStopping Engine Disengage mower or attachment before backing upUsing Reverse Implement Option To Travel in ReverseDaily Operating Checklist Testing Safety SystemsPushing Machine TestTest Avoid Damage to Plastic and Painted Surfaces Avoid Using Ground Engaging Equipment Using Front WeightsUsing Rear Wheel Weights Using Tire ChainsAdjusting Cutting Height Operating MowerOperate Mower Safely Check Ground ConditionsM40161 Adjusting Mower Level Front-to-Rear Dismounting to Inspect or Unplug Mower or Optional Bagger Engaging and Disengaging MowerDisengaging Mower Replacement Parts John Deere QualityParts for Tractor Parts for Mower Decks Inch DeckPractice Safe Maintenance Service Machine SafelyAvoid Injury From Contacting Blades Service Interval Chart Service IntervalsService Record Service Engine Adjusting CarburetorAvoid Fumes Engine OilMake sure engine is Cold when checking engine oil level Checking Engine Oil Changing Engine Oil and FilterChecking and Cleaning Air Cleaner Elements Service precleaner Checking Spark PlugsReplacing Fuel Filter Service Steering and Brakes GreaseWheel Spindles Axle PivotAdjusting Brakes Service Mower Avoid Injury From Contacting Blades GreaseAdjusting Mower Belt Tension Replacing Mower Drive BeltAdjusting Spindle Brake Checking Mower Blades Servicing Mower BladesSharpening Blades Balancing BladesService Electrical Checking the BatteryClean Battery and Terminals Removing and Installing the BatteryCharging the Battery Using Booster Battery Replacing Headlight BulbReplacing Fuse Service Miscellaneous FuelUsing Clean Fuels Using Fresh Fuel and StabilizersOctane Rating Fuel BlendsAvoid Damage Care for Plastic and Painted SurfacesRepair Service Miscellaneous Removing Mower Removing MowerInstalling Mower Installing MowerPicture Note Front of left hand front wheel shown Picture Note Left side of tractor shownInstalling Mower Using Troubleshooting Chart TroubleshootingEngine Troubleshooting Mower Troubleshooting Storing Machine Storing SafelyPreparing Machine for Storage Preparing Engine For StorageRemoving Machine From Storage Dimensions SpecificationsElectrical System Tires Mower DeckRecommended Lubricants Cutting Width mm 46Warranty Limited Warranty for NEW Scotts Brand ProductsTire Warranty Limited Engine WarrantyWarranted Parts Limited Battery Warranty To Secure Warranty ServiceIndex GreaseRemoving Mower Reverse Implement Option, Using Order Form Service LiteratureTitle Number Price Qty Total Page Page Investment in Quality Refer to your operator’s manualContact your dealer Call the Customer Communications Center