12 Medalist SL Family Installation Guide, November 1995
To transfer the software, you must put a blank, bootable diskette into Drive A. To create a bootable diskette:
1.Insert your DOS diskette into Drive A.
2.Type format a: /s.
The drive reads the DOS diskette and prompts you to insert the diskette you want to format into Drive A.
3.Insert the blank diskette. Press ENTER. When the format is complete, you can transfer the installation software files to the diskette.
To transfer the software files:
1.Boot the computer with the diskette to which you want to transfer the software files.
2.Enter the System Setup. (Refer to your computer user’s guide. System Setup may be called Setup, BIOS Setup or CMOS Setup.) If your computer uses an automatic setup system, go to step 5.
3.Find the hard disc configuration in the System Setup screen.
4.Select drive type 2 for your new Seagate drive. If your com- puter does not offer drive type 2, use the following values: 615 cylinders, 4 heads and 17 sectors.
Note. These are interim
5.Activate the prompt for the Seagate drive.
6.Type seamove and press ENTER.
This command transfers the files from the drive to the diskette in Drive A. When the transfer is complete, the Seamove program erases the files and the drive partition and reboots
