20 Medalist SL Family Installation Guide, November 1995
Standard setup
If your computer accepts the full capacity of the new drive, System Setup must be configured to recognize the drive. Some comput- ers automatically detect the new drive and configure System Setup. This section tells you how to manually configure System Setup. When the setup is complete, partition and format the drive.
1.Turn the computer on.
2.Enter System Setup. (Refer to your computer user’s guide. System Setup may be called Setup, BIOS Setup or CMOS Setup.)
3.Find the hard disc configuration in the System Setup screen.
4.Select a drive type that matches the drive translation geometry for your drive as shown in the table.
| CHKDSK | Translation geometry | CMOS | ||
|
|
|
| ||
Model | 2 |
|
| Sectors | (Setup) |
| Mbytes | Cyl | Heads | Mbytes3 | |
| per track | ||||
|
|
|
|
|
|
|
|
|
|
|
|
ST5540A | 541.9 | 1,050 | 16 | 63 | 517 |
|
|
|
|
|
|
ST5851A | 854.6 | 1,656 | 16 | 63 | 815 |
|
|
|
|
|
|
ST51080A | 1,083.8 | 2,100 | 16 | 63 | 1,034 |
|
|
|
|
|
|
ST51270A | 1,282.4 | 2,485 | 16 | 63 | 1,223 |
|
|
|
|
|
|
Note. CHKDSK and CMOS capacities are approximations. The capacities your computer reports may vary slightly.
2.One Mbyte equals 1,000,000 bytes.
3.One Mbyte equals 1,048,576 bytes.
