Cheetah 18 Installation Guide, Rev. A | 39 |
LW drives
Setting the SCSI ID jumpers
Use the J6 connector to set the SCSI ID (see Figure 11). To change the SCSI ID, install jumpers as shown in the illustration.
Drive
Front
Jumper Plug (enlarged to show detail)
Pin 1
J6
SCSI ID = 0
SCSI ID = 1
SCSI ID = 2
SCSI ID = 3
SCSI ID = 4
SCSI ID = 5
SCSI ID = 6
SCSI ID = 7
SCSI ID = 8
SCSI ID = 9
SCSI ID = 10
SCSI ID = 11
SCSI ID = 12
SCSI ID = 13
SCSI ID = 14
SCSI ID = 15
