Cheetah 18 Installation Guide, Rev. A | 41 |
LW drives
Terminator power
You can configure this drive to supply termination power to the SCSI bus by placing a jumper on J2 pins 1 and 2. The default setting is no jumper, meaning that some other source (other than this drive) is suppling termination power to the SCSI bus.
J2
R R
T D MW P E E T
E S E P D S S P
Pin 1 Pin 2
Term. Power to SCSI Bus
Host adapter or other device provides term power to external terminator
J2 Jumper Plug
(enlarged to show detail)
J2
J6
Drive
Front
