SCSI ID = 0
(default)
Jumper Plug
(enlarged to
show detail)
J6
Drive
Front
Pin 1
Reserved
A2A1A0
Shipped with cover installed.
Do not install jumpers;
retain cover unless 20 pin
plug is installed.
1197531
Drive Activity LED
Optional connections to
switching circuits in host
equipment to establish
drive ID.
Dashed area is optional host circuitry (external to the drive) connected to
host supplied optional usage plug. Do not connect anything to pins 13-20.
+5V
Host
Alternate
Usage Plug:
Reserved Pins
8642
Ground
A3
SCSI ID = 1
SCSI ID = 2
SCSI ID = 3
SCSI ID = 4
SCSI ID = 5
SCSI ID = 6
SCSI ID = 7
SCSI ID = 8
SCSI ID = 9
SCSI ID = 10
SCSI ID = 11
SCSI ID = 12
SCSI ID = 13
SCSI ID = 14
SCSI ID = 15
PCB
PCB
18 Hawk 2XL Family Installation Guide, Rev. C_______________________________________________________________________________________________________________________
Figure 3b. Model "W" and "WC" drive ID select and LED connectionW/WC drive