Hawk 2XL Family Installation Guide, Rev. C | 25 |
_______________________________________________________________________________________________________________________
•Using a conversion frame kit:
To mount a 3.5" drive in a 5.25" drive bay, install the drive in the frame kit (installation instructions and re- quired hardware are included with a frame kit). Then mount the frame kit in the drive bay.
If you are installing two disc drives, repeat the appropri- ate procedure above for the second drive.
•Using a special module:
"WC" drives should be fitted with slides or most likely, mounted in a special module that slides into the host equipment.
•Drive activity LED:
If the drive mounts such that the drive activity LED does not show when the computer cover is on, the computer may provide for a remote LED two conductor cable to be used on all models. This cable plugs into J6 on the front of the drive as shown in Figure 3a.
"WC" model drives have a line available in the
