Kenwood TM-D700E Digital Code Squelch DCS, Using DCS, Press Tone to activate the DCS function

DIGITAL CODE SQUELCH (DCS)

Digital Code Squelch (DCS) is another application which allows you to ignore (not hear) unwanted calls. It functions the same way as CTCSS. The only differences are the encode/ decode method and the number of selectable codes. For DCS, you can select from 104 different codes listed in the table.

Received

DCS code: 125

Not Received

USING DCS

1Press the left or right [BAND SEL] to select band A or B.

•If necessary, press [F], then the same [BAND SEL] to recall the sub-band.

2Press [TONE] to activate the DCS function.

•“DCS” appears when the DCS function is ON.

•Each press of [TONE] changes the selection as Tone –> CTCSS –> DCS –> No selection.

3Press [F], [T.SEL].

•The current DCS code appears and blinks.

DCS code: 125

DCS code: 205

11

023	065	132	205	255	331	413	465	612	731
025	071	134	212	261	332	423	466	624	732
026	072	143	223	263	343	431	503	627	734
031	073	145	225	265	346	432	506	631	743
032	074	152	226	266	351	445	516	632	754
036	114	155	243	271	356	446	523	654
043	115	156	244	274	364	452	526	662
047	116	162	245	306	365	454	532	664
051	122	165	246	311	371	455	546	703
053	125	172	251	315	411	462	565	712
054	131	174	252	325	412	464	606	723

4Press [c]/ [d] to select a DCS code, then press [OK].

You will hear calls only when the selected code is received. To answer the call, press and hold Mic [PTT], then speak into the microphone.

Note: You cannot use the DCS with the Tone or CTCSS function.

57