Kenwood TM-D700A, TM-D700E instruction manual Mic Key Function, Rit On/ Off Xit On/ Off

CONTROL OPERATION

When in the Sky Command mode, the Mic keys of the Commander will function as below. First switch ON the HF transceiver and press Mic [0] on the Commander.

Each time you press the desired key, the Commander will automatically enter transmit mode and send the corresponding control command to the Transporter.

	To switch ON/ OFF the HF	Press Mic [1].
	transceiver
	To change the frequency or	Press Mic [UP]/ [DWN].
	memory channel on the HF
17	transceiver
	To transmit audio on an HF	Press and hold Mic [PTT],
	frequency	then speak into the
		microphone.
	To receive audio on an HF	Press Mic [2].
	frequency
	To monitor the UHF band	Press the Mic PF key
	on the Commander	assigned the Monitor
		function.

Mic Key Function

1Power ON/ OFF

2HF frequency receive ON/ OFF

3Modulation mode switch

4RIT ON/ OFF

5XIT ON/ OFF

6RIT offset or XIT offset clear

7Split-frequency ON/ OFF

8Transfer from Memory to VFO

9	In VFO mode: VFO A/ VFO B switch
	In Memory Recall mode: no change
0	Current settings retrieve (from HF
	transceiver)

BVFO/ Memory Recall mode switch

CXIT/ RIT offset frequency increase

DXIT/ RIT offset frequency decrease

	In LSB, USB, or CW mode: 10 Hz/ 1 kHz
1	switch
	In FM or AM mode: 1 kHz/ 10 kHz switch
# 2	In VFO mode: frequency entry ON
	In Memory Recall mode: channel number
	entry ON

1“FS” appears when you select 1 kHz step (LSB/ USB/ CW) or 10 kHz step (FM/ AM).

2After pressing Mic [#], press Mic [0] to [9] to enter a frequency or memory channel number.

80