Kenwood TM-D700A, TM-D700E Display Dimmer, Auto Dimmer Change Display Contrast Adjust

DISPLAY DIMMER

You can manually change the display illumination to suit the lighting conditions where you are operating.

1Press [F], [DIM].

•The current illumination level appears and blinks; The default is level 1.

2Press [c]/ [d] to select from 5 levels, including OFF.

3Press [OK] to complete the setting.

Note: Selecting OFF automatically switches Auto Dimmer Change ON.

AUTO DIMMER CHANGE

DISPLAY CONTRAST ADJUST

The display visibility changes depending on ambient conditions, for example between daytime and nighttime. When you find the display is not clear, use this function to select the optimum display contrast.

Access Menu 1–1–2 (CONTRAST) and select from levels 1 to 16. The default is level 8.

Note: The display contrast may be affected by a change in temperature. Adjust the contrast as necessary.

POSITIVE/ NEGATIVE REVERSAL

You can change the display status between Negative

This function increases the display intensity one step brighter for approximately 5 seconds when you press a front panel button or Mic key, or turn the Tuning control. No change occurs if you have selected the brightest level. Access Menu 1–1–4 (AUTO DIMMER) and select “ON”.

and Positive (default) using Menu 1–1–3 (REVERSE MODE).

14

65