Seagate ST336607FC, ST3146807FC manual Mechanical specifications, Mounting configuration dimensions

30 Cheetah 10K.6 FC Product Manual, Rev. B

6.4Mechanical specifications

The following nominal dimensions are exclusive of the decorative front panel accessory. However, dimensions of the front panel are shown in figure below. Refer to Figure 15 for detailed mounting configuration dimensions. See Section 8.5, “Drive mounting.”

Height:			1.000 in		25.4 mm
Width:			4.000 in		101.6 mm
Depth:			5.75 in		146.05 mm
Weight:			1.62 pounds		0.734 kilograms
					K
//	T	-Z-	S
			H	[1]	-Z-
				L
					J
				B
				R	Notes:
			N -Z- -X-		[1] Mounting holes are 6-32 UNC 2B, three
					on each side and four on the bottom.
					Max screw penetration into side of drive
			A		is 0.15 in. (3.81 mm). Max screw
		-Z-			tightening torque is 6.0 in-lb (3.32 nm)
					with minimum full thread engagement of
			M		0.12 in. (3.05 mm).
	U	-X-
						Dimension Table
		P				Inches		Millimeters
			[1]		A	1.028	max	26.10	max
					B	5.787	max	147.00	max
					C	4.000	± .010	101.60	± .25
					D	3.750	± .010	95.25	± .25
					E	0.125	± .010	3.18	± .25
					F	1.750	± .010	44.45	± .25
			F		H	1.122	± .020	28.50	± .50
					J	4.000	± .010	101.60	± .25
					K	0.250	± .010	6.35	± .25
					L	1.638	± .010	41.60	± .25
					M	0.181	± .020	4.60	± .50
					P	1.625	± .020	41.28	± .50
					R	1.618	± .003	41.10	± .08
					S	0.276	± .040	7.00	± 1.02
					T	.015	max	0.38	max
					U	.015	max	0.38	max
			E	D
				C
				-X-

Figure 15. Mounting configuration dimensions